Logo

624 RAM WHISPAIR GAS BLOWER

SKU:
364019
Availability: In stock

*For pricing please contact us.

Max Flow: 3244 CFM
Max Pressure: 10 psi
Max Vacuum: 16″ Hg
Max Speed: 3000 RPM
MANUFACTURER: Howden Roots

Flow Range: to 3244 CFM
Max Δ Pressure: 10 psi
Max Δ Vacuum: 16″ Hg
Maximum RPM: 3000
Minimum RPM: 636
Max ΔT: 230˚F
Inlet Connection: 10″ FLG
Discharge Connection: 8″ FLG
Shaft Dia.: 2″
Drive End Lubrication: Oil
Gear End Lubrication: Oil
Required Oil for Horizontal Unit: 145 ounces
Required Oil for Vertical Unit: 83 ounces
Unit Weight: 910 pounds (413.6 kg)
Shipping Weight: 1037 pounds (353 kg)

Seal Elastomers
RAM-GJ units are equipped standard with Viton™ O-rings, but for steam applications or special chemical processing two elastomer upgrades are available for special order:

Viton™ – Type A Viton O-rings (Durometer 75) are standard on RAM-GJ units. Viton™ fluoroelastomer performs at a wide range of temperatures, with oil and chemical resistance being unaffected by elevated temperatures. It also provides resistance to degradation by a wide variety of fluids and chemicals, including excellent resistance to oils, fuels, lubricants, and most mineral acids.

Aflas® – Aflas O-rings are suited for steam applications. TFE/P is a copolymer of tetrafluoroethylene and propylene with a fluorine content of approximately 54%. A unique material due to its resistance to petroleum products, steam, and phosphate-esters, TFE/P is ideal for heat transfer media, amines, acids and bases, as well as hot water and steam up to +170°C (+340°F). Service temperatures are (25°F) to +204°C (+400°F); The compression set resistance at high temperatures is inferior to standard fluorocarbons.

Kalrez® – DuPont™ Kalrez® perfluoroelastomer (FFKM/FFPM) parts resist over 1,800 different chemicals, while offering the high temperature stability of PTFE (327°C). They’re used in highly aggressive chemical processing, semiconductor wafer fabrication, pharmaceutical, oil and gas recovery, and aerospace applications.